Tr Split Core Current Transformer OPC 100A 50mA 25mA 50A 20mA 333mv 26.6mA 3.33V CT Clamp Mini AC Current Transformer

• Application: Electronic, Instrument
• Type: Current Transformer
• Phase: Single
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: TRFK-16C-001
• Operation Condition: Outdoor
• Usage: Protection, Measurement
• Winding Form: Small Fixed Type
• Insulating Medium: Common Insulating Materials
• Installation: Active Type
• Magnetic Circuit Structure: Combined Type
• Voltage Transformation Principle: Electromagnetic Type
• Rated Primary Current: 1A~100A
• Rated Secondary Current: 0.5mA~100mA
• Overload: 1.2 Times
• Aperture: 15mm
• Transport Package: Carton
• Specification: HOLE 15
• Trademark: TR
• Origin: China
• HS Code: 850450
• Production Capacity: 1000000
• Package Size: 15.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 0.500kg

Product Description

Main characteristics

The buckle structure is fixed and the stability is good Adopt high magnetic permeability core, good linearity and high sensitively Terminal output, easy to stall

Applications

Rural power grid reconstruction project Online environmental monitoring Smart fire-fighting power consumption Smart power consumption system Power quality analysis and electrical equipment signal collection

Electrical parameters
Type	TRFK-16C
Rated primary current	1A~100A
Rated secondary current	0.5mA~100mA
Overload	1.2 times
Secondary load	≤50Ω
Aperture	15mm
Ratio error@rated primary	±0.5%, ±1.0%
Phase error@rated primary	≤90′
Working frequency	50/60 Hz
Rms voltage for AC isolation test (between primary and secondary)	3kV AC/1mA 10s
Relative humidity	≤90%
Operating ambient temperature	-25ºC~+75ºC
Storage temperature	-40ºC~+85ºC
Barometric condition	70kpa~106kpa
Application place	Indoor use
Secondary output type	Terminal output
Weight	Around 180g

Accuracy parameters
Input current(A)	5%In	20%In	50%In	100%In	120%In
Ratio error(%)	±0.75	±0.5	±0.5	±0.5	±0.5
Phase error(′)	≤120	≤120	≤90	≤90	≤90

Installation instructions

Warning: Please use professional and appropriate protective equipment to prevent electric shock and ensure safety.

Installation steps

Step1. Before installing, ensure that the circuit is in the state of power failure, or live installation operation, professional personnel are required.

Step 2. Open the protective cover of current transformer, connect the wire with the terminal output of the current
transformer and connect it to the port of the measuring equipment, and ensure the circuit is closed. See Figure 1.

Step 3. Open the transformer latch and prepare for installation. See Figure 2.

Step 4. Place the cable inside the hole of current transformer. Ensure that the current direction of the cable is consistent with the arrow on the current transformer. Lock the latch again, and fix the cable with the nylon ties to hook both ends of the transformer to prevent sliding. See Figure 3.

Fig.1

Connect S1 and S2 with special cables

Fig.2

Open the latch and run through the cable

 

 

Fig.3

Lock the latch, and fix the cable using a nylon tie